DSMC2 V-LOCK BATTERY MODULE PRO
The DSMC2® V-Lock Battery Module Pro is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using RED BRICK®, REDVOLT-V™, or other standard V-Lock batteries. The V-Lock mount and protected release button ensure ongoing power even during mobile shoots.
This DSMC2 battery module offers a P-Tap connector on top and an auxiliary port on the side for powering peripherals and accessories. Together the P-Tap and auxiliary connectors support a maximum combined current of 3.8 Amps.
This module also offers a DC IN power port that can be used to power the camera system when the module is attached to the BRAIN. When DC IN power is supplied to the module, and the camera is turned off, this module can also trickle charge the attached V-Lock battery.
Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a lightweight and space-saving form factor. The DSMC2 V-Lock Battery Module Pro is an ideal power solution for use with most DSMC2 expanders. Alternatively, connect the DSMC2 V-Lock Battery Module Pro directly to your DSMC2 BRAIN for a low-profile, battery-only power configuration.
- Height: 4.57 in. (116.0 mm)
Width: 4.06 in. (103.1 mm)
Depth: 1.51 in. (38.3 mm)
- 0.824 lbs (374 g)
- Aluminum Alloy
- 4x M4 captive mounting screws
- –20°C to 50°C (–4°F to 122°F)
- Power delivery via rear pogo connector (13-Pin)
- DC IN (6-Pin 1B LEMO socket)
P-Tap Aux Power output (2-Pin), 3.0A
Aux Power output (2-Pin 0B LEMO), 3.8 A shared
- RED BRICK, REDVOLT-V, and other standard V-Lock batteries
- 0°C to 40°C (32°F to 104°F)
- Compatible with all DSMC2 firmware v6.3.102 or later